|
Short descriprtion: Foldable TRIcopter frame with GoPro mount - TRI002
Product Code: TRI002
Materials: Fiberglass G10/G11 1mm thick, powder painted aluminium tube 8x12x1mm, M3 screws.
Size: <> 670mm diameter - 335mm motor center.
Weight: <> 290g frame only.
Propellers size: 10-11 inch.
Included parts: including YAW mechanism, velcro, round rubber (for LiPo mounting), two spare arms, one spare motor guard, spare landing leg and GoPro camera mount.
Not included: servo, motors, ESC, radio, flight controller etc
Description: Middle size, foldable frame - much more easy to transport.Frame is prepared for typical motors with 16 or 22mm mounting hole distance like Emax 2822, RCtimer 2830-14, RCtimer 2822-14 and many others. This frame is designed for smoth flying with 10” propellers. The best will be slower motors (under 1000kv) like RCtimer 2830-14. Space for LiPo is under frame. Typical flying time is 10-13min (with 2200mAh LiPo, depending of flying style).
Smart design of Yaw mechanism: My own design of Yaw mechanism is very simply - thanks this working fine even after hard crash :) I struck many timmes into the ground and never need to replace any parts of this mechanism :) If the main shaft will be bend you can just streighten it using your hands or replace with new one - this is 45mm screw :) You can use typical micro servo like TowerPro MG90S, HItec HS-65HB etc (not included!).
GoPro camera antivibration mount: You can easy mount GoPro camera. Antivibration mount provide better quality of your video. Flying with camera can be very funny but can be very dangerous for your camera too. Remember that in case of hard crash you can easy destroy your expensive equipment - you fly on your own responsibility!
Tested and RECOMMENDED configuration:
700-1000kV motors for example RCtimer A-2830/14 with 10-12A ESCs - TowerPro MAG 12A, Turnigu Plush 12A-E.
10" propellers like EPP 10x4.5. Remember than ANY motors and propellers should be ballanced before you will try to fly!
Assembly guide:
Sample videos:
The specifications and designs are subject to be changed without prior notice for futher improvement.
|
