|
Short descriprtion: Middle size universal SIXcopter frame.
Product Code: SIX002
Materials: Fiberglass G10/G11 1-2mm thick, aluminium tubes 8x12x1mm.
Size: <> 635mm diameter - motor to motor distance.
Weight: <> 430g frame only.
Propellers size: 10-11 inch will fit. I'm using 10x4.5" propellers.
Included parts: fiberglass plates, aluminium 12x8x1mm arms, needed screws, washers, spring washers, nutts, spacers, two spare arms, one spare leg, velcro (for LiPo mounting).
Not included: motors, ESC, radio, flight controller etc
Description: Middle size SIXcopter frame with additional blank board for any flying controller. Space for ESC inside frame. Frame is prepared for typical motors with 16 or 22mm mounting hole distance like RCtimer 2830-14 and others. Arms easy fit 12” propellers, but 10” propellers are big enought. Space for LiPo is under frame. You can use many diferent fly controller in X or + mode - KKuk, MultiWii, Arducopter, GU344, FY90Q, Arducopter. Almost any 50x50mm size board.
Tested and RECOMMENDED configuration:
700-1000kV motors for example RCtimer A-2830/14 with 10-12A ESCs - TowerPro MAG 12A, Turnigu Plush 12A-E.
10" propellers like EPP 10x4.5. Remember than ANY motors and propellers should be ballanced before you will try to fly!
|
